Flip your lighter over and turn the adjuster back with the screwdriver. Community Q&A Search Add New Question Is it dangerous to refill a lighter? wikiHow Contributor If done wrong, it is very dangerous, especially around flames and in an area that is not well ventilated. You will see a small circular pin, known as the flint screw, and a rectangular piece of felt, known as the felt pad. To fill your lighter, you will pull up the felt pad. The first couple of times you light your Zippo after refilling, your flame may be bigger than normal. Using charcoal fluid can be very dangerous. 2 Remove the chimney cap. The butane can not go into a lighter if the lighter is full of air. The refill lever is also sometimes known as the nipple. It is located on the bottom of most butane lighters.
Use your tool as a lever to pull the felt pad up. 4 Squirt your lighter fluid in to fill. This is the portion you lift to reveal the rayon balls, which look like cotton, and a wick underneath. You’ll be dealing with flammable materials and gas, so you need to be in an open space with good ventilation. The height of a good flame should be about 1 to 1 1⁄2 inches (2.5 to 3.8 cm). Let the butane settle for a few minutes for attempting to light the lighter.
Look for bottles that come with metal tips instead of plastic ones. You can identify the nipple by flipping your lighter upside down and locating the circular hole. Metal tips are better for inserting the butane into the lighter.Make sure to read the warnings and instructions on the butane canister to make sure it works with your lighter.