Инструкция на kenwood kdc

инструкция на kenwood kdc
General ・Since Bluetooth is wireless communication, there may be cases where normal communication is not available depending on signal quality. ・Compatibility status shown above is applicable to the unit that we have used for the test. Ring Tone in Phone ・The Ring Tone that is played depends on the cell-phone. Other wiring connection has been completed earlier. (page 19) Before attaching, make sure the direction of the escutcheon is correct. Cuando se utiliza el archivo de audio con información de la base de datos agregada mediante “KENWOOD Music Editor Editor Light ver1.1,” puede buscar un archivo por título, álbum o nombre del artista utilizando la búsqueda de música.


Familiarity with installation and operation procedures will help you obtain the best performance from your new CD-receiver. Scrolls the display information if pressed and held. SCRL DISP — Enters clock adjustment mode directly (page 8) if pressed and held while in clock display screen. Reinsert the disc properly. If the condition did not improve, turn off the unit and consult your nearest service center. CD-R/CD-RW cannot be played back and Insert a finalized CD-R/CD-RW (finalize with the component which you used tracks cannot be skipped. The number of registration of phone. PBAP OPP Supported Cell-phone Compatibility List ・yes = Usable.no = Function unavailable.

All characters may not be displayed in all cases. ・Depending on the setting or status of the connected cell-phone, some functions may not work properly. Page 49: Para Escuchar La Radio Para escuchar la radio Mantenga pulsado durante aproximadamente 2 segundos para memorizar la emisora actual. Pulse brevemente para recuperar la emisora memorizada. 1 Pulse SRC para seleccionar “TUNER”. 2 Pulse repetidamente para seleccionar una banda (FM1/ FM2/ FM3/ AM). 3 Pulse 4 / ¢ para buscar una emisora. Page 19: Wiring Connection P. CONT To the terminal that is grounded when either the telephone rings Brown or during conversation. (To connect the Kenwood navigation (Mute control wire) MUTE system, consult your navigation manual.) Page 20 Installing the unit Connect the wiring harness to the unit. For your recordsRecord the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below.

Похожие записи: